How to print on a bottle the second part

16. Note that the cone is not ticked when the cylinder is used, and the "Manual Mode" is ticked. and The print quantity shall be 1 17. Flash spray (a white paper can be used to receive flash spray if necessary to see the status of the nozzle). Click "Print" after the status OK. 18. After printing, confirm whether to modify the picture position on the bottle, UV lamp setting based on the picture effect. If necessary, set corresponding paremeters. 19. If automatical print of the same product is required, "Manual Mde" shall not be ticked. After reconfirming that the product can be placed stably, release the "push" and "hold" button, and place the product on the "hold" clamps. 20. Set the quantity to be printed in the "Print Number". 21. Click "Print" in the software, confirm, and then press the "print" button on machine, and the machine will print. 22. After printing, change another unprinted product, and manually press the "print" button of the machine again to continue printing, 23. Repeat the last step to complete continuous print 24. At the end of work, check the status of the print head. If it is not good, press ink or handle it in time if the status is not good.